Firmware upgrade/Flash with Multitool software

USB CONNECTED to the PC, no WIFi/Lan modules or Raspberry connected to Z-Bee

Starting from Z-Bee Duo rev.E it is possible to flash zigbee firmware without the need to install python and press buttons. This can be done thanks to xyzroe flashing tool.

• Download and unpack flash tool (in a folder of your choice or in desktop), it is an executable, no need to install: Multitool
• Download and unpack (in a folder of your choice or in desktop) the new firmware to flash (for example CC1352P2_CC2652P_other_coordinator_20210120.hex).
• Now plug USB stick to the computer (remember to remove wifi or ethernet module if present).
• Open flash tool and locate USB port used by Z-Bee (1) and (2) fig. 1.
• Locate and select the firmware to flash (1) fig.2. Select options as in (2) fig.2 and press START (3) fig.2.
• After few seconds flash is Done!

fig.1

fig.2